7.2. Changelog

All notable changes to this project will be documented in this file.

The format is based on [Keep a Changelog](http://keepachangelog.com/) because it was the first relatively standard format to pop up when I googled “changelog formats”.

7.2.1. [Unreleased] - Docker Support

7.2.1.1. Added

  • Added support for Docker installations
  • Added environment/container version number to GitHub page
  • Tilt “version” is now displayed on the Tilt Configuration page (Bluetooth only)
  • Tilt battery level now shows on the Tilt Configuration page (Bluetooth v3/Tilt Pro only)
  • “Last Check-in” time now added to Tilt configuration page (Bluetooth only)

7.2.1.2. Changed

  • Removed instances where BrewPi-Script would write to the database
  • Adjusted feedback loop for Circus to eliminate a potential race condition with transactional databases
  • Redesigned available firmware list to reduce confusion
  • Stale gravity check-in points will now not be displayed in the gravity dashboard panels

7.2.1.3. Fixed

  • Fermentrack now works with properly transactional databases (e.g. Postgres)

7.2.2. [2020-12-19] - Tilt Pro

7.2.2.1. Added

  • iSpindel temperature readings can now be calibrated for accuracy
  • Add properly sized app icon for apple devices

7.2.2.2. Changed

  • Added support for the new Tilt Pro
  • Updated Sentry target
  • Round iSpindel readings to four decimal places

7.2.2.3. Fixed

  • Updated requirements to support the new pip

7.2.3. [2020-11-07] - Temp Profile Tweaks & Docker Prep

7.2.3.1. Added

  • Added optional “notes” field to fermentation profile models
  • Added error message when attempting to create a point with an invalid temp/ttl in a temp profile
  • Added support for configurable gravity units (e.g. plato, specific gravity)

7.2.3.2. Changed

  • Changed link to sqlite database to allow for a subdirectory in Docker installs
  • Fermentation profile points can now be deleted for in-use fermentation profiles
  • Remove Python 3.7 warning (everyone should have upgraded by now)
  • If a Grainfather, Brewfather, or generic push target logging URL doesn’t begin with http:// it is now automatically appended

7.2.3.3. Fixed

  • Bug causing errors when enabling beer profile mode
  • Can now properly push to BrewFather when a fully populated temperature controller isn’t linked
  • Don’t prompt new installs to run the script to fix old sqlite files

7.2.4. [2020-08-22] - Bugfixes

7.2.4.1. Added

  • Added pin definitions for esp32 BrewPi firmware
  • Added Linux networking capability test to Tilt connectivity test suite

7.2.4.2. Changed

  • Added ability for BrewFather push target to push temps from BrewPi temp sensors

7.2.4.3. Fixed

  • Fixed bug that prevents reloading of cached controller objects
  • Properly detect/force temperature conversion for iSpindel

7.2.5. [2020-06-05] - Django 3.0 Support

7.2.5.1. Added

  • Added button to controller settings page to restart a controller

7.2.5.2. Changed

  • Updated code to be Django 3.0 Compatible
  • Changed from Django 1.11 to Django 3.0
  • Toggling display of a graph line on a temp controller’s dashboard now clears the data point displayed in the legend
  • Refactored brewpi-script to accept device IDs rather than names

7.2.5.3. Fixed

  • Properly catch exception when Redis test cannot connect to server
  • Gravity and gravity temp colors when graphed on temp controller graphs will now display the correct color in the legend
  • Links to CSVs from the beer log list now properly generate if the CSV exists
  • Correct error detection/logging when a temp controller with an attached gravity sensor attempts to log before the gravity sensor logs its first point
  • Properly check that a temperature setting is provided when setting a Beer or Fridge Constant mode for temp controllers
  • Temp controller name uniqueness checks are now properly enforced in all add controller workflows

7.2.6. [2020-04-11] - Bugfixes & Tilt Troubleshooting

7.2.6.1. Added

  • Added explicit support for LBussy’s BrewPi-Remix I2C Board
  • Exposed upgrade.log from the help screen
  • Store the exact last time that a message was received from a Tilt to Redis
  • Add sentry support to tilt_monitor_aio.py
  • Added “debug” scripts for bluetooth Tilt connections
  • Added TiltBridge connection settings to Tilt management page

7.2.6.2. Changed

  • Removed legacy Python 2 code
  • Reduced gravity sensor temp precision to 0.1 degrees
  • Locked pybluez, aioblescan, and redis versions to prevent undesired format changes going forward

7.2.6.3. Fixed

  • Fix display of TiltBridge mDNS settings on Tilt settings page

7.2.7. [2020-02-17] - Improved ESP32 Flashing Support

7.2.7.1. Added

  • Added support for flashing a bootloader and otadata partition to ESP32 devices

7.2.7.2. Changed

  • SPIFFS partitions can now be flashed to ESP8266 devices

7.2.8. [2020-02-15] - ThingSpeak and Grainfather Support

7.2.8.1. Added

  • Added support for pushing data to ThingSpeak (thanks @johndoyle!)
  • Added support for pushing data to Grainfather (thanks @mp-se!)

7.2.8.2. Changed

  • Gravity sensors attached to BrewPi controllers will now send those controller’s temps to Brewfather
  • An explicit error message will now be displayed when a user attempts to manually access the ispindel endpoint

7.2.8.3. Fixed

  • Fixed where Fahrenheit readings coming from an iSpindel could be improperly reconverted to Fahrenheit
  • Lock temperature display on dashboard panels to one decimal place
  • Allow updates to controller settings when controller name isn’t changing (for real this time)
  • Fix bug that would default all Tilts to ‘Bluetooth’ even when a TiltBridge was selected
  • Fixed issue where Tilt readings were not being properly decoded (Thanks NecroBrews!)
  • Fixed issue where dashboard panels were not being updated (Thanks NecroBrews!)

7.2.9. [2019-12-15] - Brewer’s Friend, Brewfather, and MacOS BLE Support

7.2.9.1. Added

  • Added support for pushing gravity sensor data to Brewer’s Friend
  • Added support for pushing gravity sensor data to Brewfather
  • Added BLE support for MacOS (thanks corbinstreehouse!)

7.2.9.2. Changed

  • Adding an external push target now triggers data to always be sent within 60 seconds regardless of push frequency

7.2.9.3. Fixed

  • Disable “View Full CSV” button if gravity/beer logs don’t exist
  • Properly cleanse booleans when changing site settings for Constance
  • Allow updates to controller settings when controller name isn’t changing
  • Remove requirement for TiltBridge value in the TiltBridge model definition
  • Ignore Tilt diagnostic codes that cause erroneous temperature/gravity readings

7.2.10. [2019-10-24] - Miscellaneous Bugfixes

7.2.10.1. Fixed

  • Prompt for reconfiguration if pin/address assignment fails on BrewPi Controller
  • Validate device name uniqueness when adding a new BrewPi Controller
  • Warn user when empty temperature is submitted alongside Fridge or Beer Constant mode
  • Return debugging info when a connection to a WiFi BrewPi Controller is refused
  • Properly handle errors in the first step of the firmware flash process
  • When logging beer points on a gravity-enabled log, make sure the gravity sensor exists (or stop logging)
  • Properly handle empty TiltBridge check-ins
  • Before adding a Tilt that uses a TiltBridge, make sure the TiltBridge exists
  • Return an error if a TiltBridge doesn’t pass properly formed JSON
  • Enforce uniqueness of a Beer name/logging device combination when the Beer is created
  • Cause brewpi-script to terminate if the controller returns invalid control settings
  • Return empty JSON for annotations if Beer doesn’t exist

7.2.11. [2019-03-31] - TiltBridge Support

7.2.11.1. Added

  • Added support for TiltBridge Tilt-to-WiFi devices

7.2.11.2. Changed

  • Removed Hex SHA display on GitHub update
  • Tweaked backup count for log files to reduce clutter

7.2.11.3. Fixed

  • Fixed hostname lookup in connection debug when running on a nonstandard port
  • Fixed multipart firmware flashing
  • Remove Git branch switching prompt during initial setup
  • Remove links to defunct Tilt logs
  • Fixed OneWire address display on BrewPi “Assign Pin/Device” page
  • Fix link to “load beer log” modal on device dashboard when no beer is loaded

7.2.12. [2019-03-17] - Firmware Flash Changes

7.2.12.1. Added

  • Added support for flashing multi-part firmware (eg partition tables)

7.2.12.2. Changed

  • Updated firmware_flash models to support additional device families
  • Changed to version 2 of firmware_flash models

7.2.13. [2019-02-17] - External Push (Remote Logging) Support

7.2.13.1. Added

  • Fermentrack can now periodically “push” readings out to an external device/app
  • Added “new control constants” support for “modern” controllers

7.2.13.2. Fixed

  • Explicitly linked Favicon from template
  • Fixed BrewPi-Script error when attempting to use feature not available in Python 3.4
  • Properly catch error in BrewPi-Script when pidfile already exists
  • Added filesize check for gravity sensor & brewpi-device logfiles
  • Add support for temperature calibration offsets

7.2.14. [2019-02-17] - External Push (Remote Logging) Support

7.2.14.1. Added

  • Fermentrack can now periodically “push” readings out to an external device/app
  • Added “new control constants” support for “modern” controllers

7.2.14.2. Fixed

  • Explicitly linked Favicon from template
  • Fixed BrewPi-Script error when attempting to use feature not available in Python 3.4
  • Properly catch error in BrewPi-Script when pidfile already exists
  • Added filesize check for gravity sensor & brewpi-device logfiles
  • Add support for temperature calibration offsets

7.2.15. [2018-10-24] - Tilt Monitor Refactoring

7.2.15.1. Changed

  • The Tilt Hydrometer monitor now uses aioblescan instead of beacontools for better reliability
  • Added support for smaller screen sizes

7.2.15.2. Fixed

  • Tilt Hydrometers will now properly record temperatures measured in Celsius

7.2.16. [2018-08-05] - Gravity Refactoring

7.2.16.1. Added

  • DS18b20 sensors can now have temperature offsets added to each reading to correct for calibration errors
  • ESP8266 controllers can now have their WiFi settings reset via the “manage sensor” web interface
  • Control constants form now supports both “new” (OEM BrewPi) and “old” (“Legacy” branch) control constants
  • Tilt hydrometers can now have their specific gravity readings calibrated
  • “Heat/Cool State” will now be shown on temperature graphs
  • Fermentrack logo added as favicon

7.2.16.2. Changed

  • The iSpindel endpoint can now be accessed at either /ispindel or /ispindle
  • Specific gravity will now be shown on graphs with 3 decimal places
  • Beer log format has been changed to add state information

7.2.16.3. Fixed

  • Removed constant LCD polling for “modern” controllers
  • Gravity support will now be properly disabled when the correct flag is set at setup
  • iSpindel devices that do not report all ‘extras’ will no longer throw errors when reporting gravity

7.2.17. [2018-04-27] - “v1.0 release”

7.2.17.1. Added

  • Added fermentation controller “Manage Device” page
  • Upgrades are now logged to upgrade.log
  • Controller “stdout” and “stderr” logs are now saved/accessible
  • Support for serial devices
  • Support for Arduino-based devices
  • Support for in-app git branch switching
  • Autodetection of serial devices
  • Huey (delayed/scheduled task) support (currently unused)
  • Controllers connected via serial can now have their serial port autodetected using the udev serial number
  • Beer profiles are now displayed in graph form
  • Firmware can now be flashed to new Arduino & ESP8266-based controllers from within the app
  • Preferred timezone can now be selected for use throughout Fermentrack
  • Beer log management (deletion/downloading)
  • Added configuration options for graph line colors
  • Graph lines can be toggled by clicking the icon in the legend
  • Added support for specific gravity sensors
  • Added support for Tilt Hydrometers
  • Added support for iSpindel specific gravity sensors

7.2.17.2. Changed

  • Inversion flag for installed devices is now shown on the “configure pins/sensors” page
  • Form errors are now displayed on “configure pins/sensors” page
  • Beer logs are no longer deleted along with the parent device (but they will become inaccessible from within Fermentrack)
  • GitHub updates are no longer triggered automatically by visiting the update page, and must now be manually triggered by clicking a button
  • The IP address of a BrewPiDevice is now cached, and can be used if mDNS stops working
  • At end of a fermentation profile the controller will now be switched to beer constant mode
  • All data points are now explicitly recorded in UTC
  • Added icon to graph legend to display line color
  • Updated to Django v1.11 (Long term support version)
  • Changed from supporting Python 2 to Python 3

7.2.17.3. Fixed

  • Inversion state no longer improperly defaults
  • Minimum graph size adjusted to account for smaller displays
  • Changed on_delete behavior to allow deletion of fermentation controllers
  • Git update check will now properly wait between checks if up to date
  • GIT_UPDATE_TYPE of ‘none’ will now properly disable update checks
  • BrewPi controllers now accept unicode names
  • “View Room Temp” link on Dashboard now functions
  • Room temp now included in legend for graphs

7.2.18. [2017-03-17] - “v0.1 release”

7.2.18.1. Added

  • First release!